Between the Poles: Middle East Geospatial Forum: Coordinating road works online in Qatar

Geoff Zeiss

About the Author

October 2024

Sun	Mon	Tue	Wed	Thu	Fri	Sat
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31

Links

Lidar News
Gene Roe's laser scanning industry news
Open Source Geospatial Foundation OSGEO
OSGeo was created to support the collaborative development of open source geospatial software and promote its widespread use
Proven guidelines for reducing underground infrastructure damage at airports, university, industrial, and commercial campuses, and towns
There are proven measures that an administration, owner, or municipal government responsible for an airport, university, industrial or commercial campus, or town can undertake to reduce the risk of underground utility damage, the associated disruptions to operations and business and the danger for workers and the public.
Sharing information about the location of underground utilities
The U.S. devotes an estimated $10 billion annually to locating underground infrastructure. Every construction project requiring excavation involves significant efforts in locating underground utilities prior to and during construction to reduce the risk of injuries and unexpected project delays. But this information is rarely shared and the location of underground infrastructure is recaptured over and over again. There are successful examples around the world where municipal and regional governments have helped enable a shared underground utility network database.
Growing evidence of the benefits of an integrated BIM+geospatial full lifecycle approach to construction
Building information modeling (BIM) has been applied to design-build construction projects for many years. A growing number of countries are mandating BIM for public projects. While the UK government has said that "...we know that the largest prize for BIM lies in the operational stages of the project life-cycle", until recently there has not been hard data to support this conjecture. Similarly there has been only anecdotal support for an integrated BIM and geospatial approach for design, build, operate and maintain projects. Now we are beginning to see data from real world projects that offer evidence for the benefits of an integrated BIM+geospatial full lifecycle approach for construction projects.
Progress in geospatial, civil, and BIM interoperability promises efficient workflows for infrastructure
The BIM and geospatial interoperability challenge is the latest symptom of the broader problem of integrating AEC and geospatial workflows, that has contributed to low productivity in the construction sector. After the announcement about a year ago by Jack Dangermond and Andrew Anagnost of a new relationship to build a bridge between Autodesk and ESRI technologies, I thought it a good time to review progress toward interoperability between the AEC and geospatial worlds.
Geography2050: Accurate location information about underground infrastructure is essential for powering our future planet
I thought it would be worth while to include here a talk I gave at GEOGRAPHY 2050 Powering Our Future Planet at Columbia University in New York about the importance of accurate location information about underground infrastructure for the future development of the energy grid. With some notable exceptions accurately recording the location of subsurface infrastructure including oil, gas, electric power and other energy infrastructure is ignored - perhaps this is a case of out-of-sight is indeed out-of-mind. The reality is that knowing the location of underground energy infrastructure is critical for national security, for disaster planning and management, for public safety and for economic efficiency. Everyone is aware of at least one disaster resulting from or exacerbated by not knowing where our energy infrastructure is - the explosions in San Bruno in California (2010) and Belgium (2004) immediately come to mind.
Deep learning enables automated extraction of building footprints and road networks from satellite imagery
Automated feature extraction from satellite imagery has made major progress in the last year. Accurate building footprints extracted from high resolution satellite imagery are becoming available from companies such as Ecopia, which has just announced a partnership with DigitalGlobe, whose satellites are capable of 30 cm (approximately one foot) resolution. Also NVIDIA has demonstrated the ability to automate detection of many road networks using sophisticated algorithms and multi-spectral high resolution imagery.
BIM + geospatial interoperability would avoid another CAD + GIS quagmire
A specific challenge currently facing the AEC and geospatial industries is integrating building information models (BIM) and geospatial infrastructure and building models. There are parallels between what happened in the 1990s in unsuccessfully addressing CAD+GIS interoperability and the current challenge of BIM+geospatial interoperability. But there are also important differences which provide grounds for optimism that the availability of both BIM and geospatial standards, a vibrant open source geospatial community, and a new willingness on the part of major software players in the BIM and geospatial industries will make it possible to successfully address the latest interoperability challenge facing the AEC (architecture, engineering and construction) and geospatial industries.
BVLOS drones improve power line inspections amid increasing fire and storm risks for utilities | Utility Dive
Transmission line inspections for vegetation management and other purposes are essential in ensuring grid reliability and resilience. We saw the devastating effect of vegetation encroachment in the recent California fires, which in part have been blamed on failure to maintain properly cleared transmission lines. With drones that can cover great distances in a single flight and provide detailed and accurate aerial imagery of transmission lines and other infrastructure, it is now possible to almost completely automate this expensive process. Automating transmission line inspections for vegetation management using BVLOS drones not only saves money, but also could improve the resiliency and reliability of the transmission grid.

« Earth Hour lowers power demand by 423 MW in Ontario | Main | Sharing geospatial information on infrastructure mandated by Delhi NCT »

April 04, 2012

Middle East Geospatial Forum: Coordinating road works online in Qatar

I have been attending and presenting at the Middle East Geospatial Forum (previously known as Map Middle East) for quite a few years. This year it is in Qatar, the site of the 2022 FIFA World Cup. Qatar's water and electric power infrastructure is unique. The ground water is brackish so all of the drinking water comes from desalination. Incredibly Qatar has 14% of known natural gas reserves, the third-largest proven gas reserves in the world behind Russia and Iran. Natural gas is used to generate electricity, some of which is exported and a portion of which powers the three desalination plants.

Mansoor Al Malki, Director of IT at Qatar Statistics Authority presented an overview of geospatial technology in Qatar. It is impressive how widely used geospatial technology is within the Government of Qatar. Something like 60 agencies use it and there is a high speed network specifically for sharing geospatial information. Several agencies including the Ministry of the Interior, KAHRAMAA (Qatar General Electricity and Water Corp), Qatar Petroleum, QTEL, and Qatar Environment and Energy Research Institute in their presentations described how their organizations used geospatial data and technology.

But the IT application which caught my eye because it would have major business benefits for utilities anywhere in the world was a national online system for coordinating road work called Road Opening (RO). It was developed by Ashghal, the Public Works Authority, and is used by organizations involved in road work including KAHRAMAA, QTEL, and Qatar Petroleum. It is an online system for applying for permits for road works. But the big benefit is that it enables cross-departmental collaboration, for example, avoiding situations where several utilties excavate and repave the same stretch of road in succession rather than all at the same time. I expect that this is exacly one of the things the UK's Traffic Management Act was intended to achieve. It provides maps of ongoing and future road construction work for cross-departmental coordination and for the public.

Posted at 04:31 PM in Electric Power, Geospatial IT, Municipal infrastructure, Natural gas, Road Infrastructure, Water and wastewater | Permalink

Comments

The comments to this entry are closed.

Between the Poles

Geoff Zeiss

October 2024

Links

April 04, 2012

Middle East Geospatial Forum: Coordinating road works online in Qatar

Comments

RSS Feed

Search

Categories

Recent Posts

Archives