Between the Poles: Open source geospatial coordinate sytem libraries are being revised

Geoff Zeiss

About the Author

September 2024

Sun	Mon	Tue	Wed	Thu	Fri	Sat
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30

Links

Lidar News
Gene Roe's laser scanning industry news
Open Source Geospatial Foundation OSGEO
OSGeo was created to support the collaborative development of open source geospatial software and promote its widespread use
Proven guidelines for reducing underground infrastructure damage at airports, university, industrial, and commercial campuses, and towns
There are proven measures that an administration, owner, or municipal government responsible for an airport, university, industrial or commercial campus, or town can undertake to reduce the risk of underground utility damage, the associated disruptions to operations and business and the danger for workers and the public.
Sharing information about the location of underground utilities
The U.S. devotes an estimated $10 billion annually to locating underground infrastructure. Every construction project requiring excavation involves significant efforts in locating underground utilities prior to and during construction to reduce the risk of injuries and unexpected project delays. But this information is rarely shared and the location of underground infrastructure is recaptured over and over again. There are successful examples around the world where municipal and regional governments have helped enable a shared underground utility network database.
Growing evidence of the benefits of an integrated BIM+geospatial full lifecycle approach to construction
Building information modeling (BIM) has been applied to design-build construction projects for many years. A growing number of countries are mandating BIM for public projects. While the UK government has said that "...we know that the largest prize for BIM lies in the operational stages of the project life-cycle", until recently there has not been hard data to support this conjecture. Similarly there has been only anecdotal support for an integrated BIM and geospatial approach for design, build, operate and maintain projects. Now we are beginning to see data from real world projects that offer evidence for the benefits of an integrated BIM+geospatial full lifecycle approach for construction projects.
Progress in geospatial, civil, and BIM interoperability promises efficient workflows for infrastructure
The BIM and geospatial interoperability challenge is the latest symptom of the broader problem of integrating AEC and geospatial workflows, that has contributed to low productivity in the construction sector. After the announcement about a year ago by Jack Dangermond and Andrew Anagnost of a new relationship to build a bridge between Autodesk and ESRI technologies, I thought it a good time to review progress toward interoperability between the AEC and geospatial worlds.
Geography2050: Accurate location information about underground infrastructure is essential for powering our future planet
I thought it would be worth while to include here a talk I gave at GEOGRAPHY 2050 Powering Our Future Planet at Columbia University in New York about the importance of accurate location information about underground infrastructure for the future development of the energy grid. With some notable exceptions accurately recording the location of subsurface infrastructure including oil, gas, electric power and other energy infrastructure is ignored - perhaps this is a case of out-of-sight is indeed out-of-mind. The reality is that knowing the location of underground energy infrastructure is critical for national security, for disaster planning and management, for public safety and for economic efficiency. Everyone is aware of at least one disaster resulting from or exacerbated by not knowing where our energy infrastructure is - the explosions in San Bruno in California (2010) and Belgium (2004) immediately come to mind.
Deep learning enables automated extraction of building footprints and road networks from satellite imagery
Automated feature extraction from satellite imagery has made major progress in the last year. Accurate building footprints extracted from high resolution satellite imagery are becoming available from companies such as Ecopia, which has just announced a partnership with DigitalGlobe, whose satellites are capable of 30 cm (approximately one foot) resolution. Also NVIDIA has demonstrated the ability to automate detection of many road networks using sophisticated algorithms and multi-spectral high resolution imagery.
BIM + geospatial interoperability would avoid another CAD + GIS quagmire
A specific challenge currently facing the AEC and geospatial industries is integrating building information models (BIM) and geospatial infrastructure and building models. There are parallels between what happened in the 1990s in unsuccessfully addressing CAD+GIS interoperability and the current challenge of BIM+geospatial interoperability. But there are also important differences which provide grounds for optimism that the availability of both BIM and geospatial standards, a vibrant open source geospatial community, and a new willingness on the part of major software players in the BIM and geospatial industries will make it possible to successfully address the latest interoperability challenge facing the AEC (architecture, engineering and construction) and geospatial industries.
BVLOS drones improve power line inspections amid increasing fire and storm risks for utilities | Utility Dive
Transmission line inspections for vegetation management and other purposes are essential in ensuring grid reliability and resilience. We saw the devastating effect of vegetation encroachment in the recent California fires, which in part have been blamed on failure to maintain properly cleared transmission lines. With drones that can cover great distances in a single flight and provide detailed and accurate aerial imagery of transmission lines and other infrastructure, it is now possible to almost completely automate this expensive process. Automating transmission line inspections for vegetation management using BVLOS drones not only saves money, but also could improve the resiliency and reliability of the transmission grid.

« Bentley's digital twin capabilities for cities includes underground infrastructure | Main | Towards a digital twin of infrastructure: efficient reality capture of new pipelines »

October 30, 2018

Open source geospatial coordinate sytem libraries are being revised

A "GDAL Coordinate System Barn Raising" has raised $144,000 to enable improvements to coordinate system libraries needed for the GDAL, PROJ, libgeotiff, PostGIS, and Spatialite open source toolchain. Support came from 25 players in the geospatial market including SAFE Software and ESRI, Boundless, Azavea, LINZ, MapBox, Riegl, Radiant Solutions, and others.

The objective of this effort is to provide GDAL, PROJ, and libgeotiff with modern capabilities including support for the updated OGC well-known text standard WKT2, replacing CSV tables with SQLite-based databases, not requiring projection transformations to pivot through WGS84, and preparing for the new North American datum NATRF2022 and NAPGD2022 which I blogged about previously.

The use of a SQLite-based database for coordinate systems definitions will allow projects to add more capability, transition custom project coordinate systems to something more universally consumable, and promote interoperability between different software.

Well-known text (WKT) is a text markup language for spatial reference systems of spatial objects and transformations between spatial reference systems. The updated standard, known as "WKT 2", was adopted by the Open Geospatial Consortium and ISO in 2015. OGC WKT2 fixes longstanding interoperability coordinate system definition discrepancies and contains tools for describing time-dependent coordinate reference systems. Several countries are updating their geodetic infrastructure to include time-dependent coordinate systems. For example, Australia and the United States are adapting time-dependent coordinate systems in 2020 and 2022, respectively. The familiar NAD83 and NAVD88 in North America are being replaced by NATRF2022 and NAPGD2022, and the industry will have to adapt to these changes.

The new libraries provide for higher accuracy transformations between coordinate systems that avoid transforming everything through WGS84 and eliminate the extra steps that this entails.

Thanks to Dale Lutz of SAFE Software for pointing me to this during a chat at GeoAlberta 2018.

Posted at 01:00 PM in 3D printing, Geospatial Open Source, Open Source Geospatial | Permalink

Comments

The comments to this entry are closed.

Between the Poles

Geoff Zeiss

September 2024

Links

October 30, 2018

Open source geospatial coordinate sytem libraries are being revised

Comments

RSS Feed

Search

Categories

Recent Posts

Archives